Solution specification
The specification of three ton diesel forklift
| FD30 DIESEL FORKLIFT SPECIFICATION | ||||||
| CZPT | 1 | Model | FD30 | |||
| two | Electrical power Type | Diesel | ||||
| 3 | Rated Potential | kg | 3000 | |||
| four | Load Middle | mm | 500 | |||
| Attribute&Dimension | five | Lift Top | mm | 3000 | ||
| six | Fork Dimensions | L×W×T | mm | 1070×125×45 | ||
| 7 | Mast Tilt Angle | F/R | Deg | 6°/12° | ||
| eight | Entrance Overhang (Wheel center to fork experience) | mm | 480/485 | |||
| nine | Ground Clearance(Base of mast) | mm | a hundred and forty | |||
| 10 | Overall Dimension | Duration to confront of fork(Without fork) | mm | 2730/2775 | ||
| eleven | Total Width | mm | 1225 | |||
| twelve | Mast Lowered Height | mm | 2115 | |||
| thirteen | Mast Extended Height(With backrest) | mm | 4150 | |||
| fourteen | Overhead Guard Top | mm | 2090 | |||
| fifteen | Turning Radius (exterior) | mm | 2440 | |||
| Efficiency | 16 | Velocity | Travel (Empty load) | km/h | twenty | |
| seventeen | Lifting (Total load) | mm/s | 510/440 | |||
| 18 | Max.Gradeability (No load/Entire load) | % | twenty | |||
| Chassis | 19 | Tire | Front | mm | 28×9-fifteen-12PR | |
| twenty | Rear | mm | six.fifty-ten-10PR | |||
| 21 | Wheelbase | mm | 1700 | |||
| 22 | Support bodyweight | kg | 4300/4500 | |||
| Electrical power&Transmission | 23 | Battery | Voltage/Potential | V/Ah | twelve/eighty | |
| 24 | Motor | Product | C240 | |||
| twenty five | Manufacture | CZPT | ||||
| 26 | Rated output/r.p.m. | kw | 35.4/2500 | |||
| 27 | Rated torque/r.p.m. | N·m | 137.seven/1800 | |||
| 28 | No.of Cylinder | four | ||||
| 29 | Bore×Stroke | mm | 86×102 | |||
| 30 | Displacement | cc | 2369 | |||
| 31 | Fuel Tank Ability | L | sixty | |||
| 32 | Transmission | Variety | CZPT | |||
| 33 | Stage | FWD/RVS | one/one | |||
Our 3 ton diesel forklift positive aspects
one. Original Isuzu or Mitsubishi engine, higher good quality compliant with CZPT phase A emission regular, the potent engine ensures CZPT forklift truck substantial managing efficiency.
2. The common LED lamps and warning lights make it safer, a lot more strength effective and develop far better doing work problem.
3. Ergonomics Adjustable seat: Designed according to the ergonomic concepts, make the procedure significantly comfortable and also relieves the tiredness induced by prolonged time ongoing operation,
4. New created overhead guard protective unit avert the sudden accidents.
5. The entire free 3-phase mast adopt German import channel with innovative welding engineering, enhance the balance of ascension, toughness and the width of entrance mast see, minimize the height of the instrument stand, broaden the visibility of pallet fork idea and items.
6. Bigger and non-slip step make the operating hassle-free and protected.
7. Security method: Outfitted with OPS or ORS seat and brake change to avert incorrect operation and protected the driver and the forklifts from all sides.
8. Install optional three-way catalytic unit to decrease the hazardous emssion beside of reduced emission engines undertake seem-evidence cotton to simplicity sounds and high exhaust program as alternative to decrease dust.
Solution Characteristics
1. Secure :
LED work lights and warning lights make it safer and far more efficient even in very poor lights conditions.
New created overhead guard protecting system avert the unexpected accidents.
Thicker reinforcing plate ensure the basic safety and performance.
2. Simple to function:
Linde-Engineering single chain with strengthened load backrest–helps make an outstanding and broader discipline of visionfor operator.
3. Lovely and comfy:
New suspension adjustable seat can make the long time functioning a lot more relaxed.
Action region is 1.5 moments bigger with reduce stage height than fellow forklifts.
four. Sturdy:
Sunken tilt cylinder below the flooring construct broader flat floor and less abrasion.
Change plastic slider to alloy copper slider, minimize the abrasion and slender the hole amongst masts.
Thicker steering axle bridge deck.
5. Environmental:
Center muffler, more environmental.
6. Large technology:
Upkeep free of charge radiators adopt Germany engineering.
Packing & Delivery
Our manufacturing facility
Our client
Right after-sale service
CZPT usually take care of soon after-sale service as critical as sale. Presently a lot more than fifty brokers around the entire world can provide CZPT specialist right after-sale support.
All the item of CZPT provided with 1 year or 2000 operating several hours (which takes place initial) interval high quality warranty.
Depth clauses and policies make sure you check out our web site and item certification.
FAQ
1. What Certificate do you have?
CZPT workshop meet with the CZPT:2008 Quality System.
All of our products with CE certificate. Some of our products meets the EPA requirements.
CZPT never recruit Underage labor.
two. Can you customize and design as the clients’ requirement?
CZPT will try its best to meet all kinds of clients’ special requirements.
Nonetheless, All the customizing and refit should be implemented safely and scientifically.
The colors can be painted as client’s need.
three. How long is the warranty of your products?
Normally 1 year or 2000 working hours whichever occurs first. Details to see the CZPT warranty policy for each model.
4. Can you produce the products labeled with the client’s brand?
With the authorization of the brand, we can OEM for our clients.
5. What payment terms do you accept?
Normally 30% T/T in advance as deposit, balance paid before shipment.
100% L/C at sight issued by world famous bank with good faith is also CZPT.
six. Delivery time:
CZPT configuration products are always in stock.
The production period of CZPTizing products is 30 times.
